My company mass production and sales elbow

My company mass production and sales elbow

Our company can mass production and sales of stainless steel elbow, carbon steel elbow and various magnetic alloy material elbow.Welcome new and old customers to consult.

In piping systems, an elbow is a pipe fitting that changes the direction of the pipe.Elbow can be divided into straight seam elbow and seamless elbow two categories;According to the Angle, there are 45°, 90° and 180° three commonly used, and according to the engineering needs, there are also 60° and other abnormal Angle elbows.Elbow materials include cast iron, stainless steel, alloy steel, malleable iron, carbon steel, nonferrous metal and plastic, etc.There are direct welding (commonly used) flange connection, hot melt connection, electric fusion connection, threaded connection and socket connection, etc.According to the production process, it can be divided into: welding elbow, stamping elbow, push elbow, casting elbow, butt welding elbow, etc.Other names: 90 degree bend, right Angle bend, etc.

1, because most of the pipe fittings are used for welding, in order to improve the welding quality, the end of the car into the groove, leaving a certain Angle, with a certain edge, this requirement is also strict, the thickness of the edge, the Angle of the number and the range of deviation are specified.The surface quality and mechanical properties are basically the same as the pipe.For ease of welding, the fittings are of the same type of steel as the pipes to be connected.

2, that is, all the pipe fittings should be surface treatment, the inner and outer surface of the oxide sheet by shot peening treatment spray, and then coated with anticorrosive paint.This is for export needs, moreover, in order to facilitate transportation in order to prevent corrosion and oxidation, both have to do this work.

3, is the packaging requirements for small pipe fittings, such as export, you need to do wooden cases, about 1 cubic meter, the number of elbows in the box is about not more than a ton, the standard allows the suit, that is, a small set, but the total weight is generally not more than 1 ton.For large Y, individual packaging is required, as for 24 ", individual packaging is required.