How to calculate the price of GB elbow

How to calculate the price of GB elbow

In the calculation of GB elbow, our company usually uses more ordinary or standard elbow, so generally speaking, we can have a careful look at the price of GB elbow. Usually, the price of large-diameter standard welded elbow is similar according to the price of tons. Therefore, we can usually know the fixed processing cost.Make specific large diameter after welding which is how much we know close, so, in accordance with the tonnage, large diameter standard welding elbow price is 2 times the price of national standard of welding steel plate, therefore, the wide fitting co., LTD. In hebei province has many years of production experience, how to calculate will inform the customer all the time,Of course, the calculation method of GB elbow is so much.

Control in line with the requirement of national standard elbow radius of curvature, such as the radius of elbow length is 1.5 D, the radius of curvature must be within the tolerance range of required, because most of these pipe fittings are used for welding, in order to improve the welding quality, end on the groove groove, leave a certain Angle, wearing a top side, this a more strict, how thick,There are many more geometric dimensions than pipe fittings. The surface smoothness and mechanical properties are basically the same as the pipe. In order to facilitate welding, the material of the steel pipe should be the same as that of the connected pipe.

The company mainly produces GB elbow, large and small head, pipe cap, tee, head, flange and other pipe fittings.Welcome to consult and order!