Carbon steel elbow application and process materia

Carbon steel elbow application and process material description:  

Carbon steel elbow is mainly used in pipe installation in a common connection, connecting two pipes with the same diameter or different nominal pipe, so that the pipeline to achieve a certain Angle of turning.  Carbon steel bend has good comprehensive performance, widely used in chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, plumbing, fire fighting, electric power, shipbuilding and other engineering installation.  

Carbon steel elbow process mainly USES is pushed and stamping elbow, elbow push system mainly USES the advanced equipment and mold push into shape, push bend forming technology has good appearance, uniform wall thickness and continuous operation, used in the characteristics of mass production, and thus be carbon steel, alloy steel elbow main forming method, is also used in some of the specifications of the stainless steel elbow forming.  

Stamping elbow is earlier used in mass production of seamless elbow forming technology in the common specifications of elbow production has been hot pushing method or other forming process to replace, but in some specifications of elbow because of the production of less, the wall thickness is too thick or too thin.  The middle plate press is used to make half of the elbow section, and then the two sections are welded together. This process is generally used for the production process of large diameter butt-welding elbows of DN700 and above.  

Carbon steel elbow material is divided into: Carbon steel material:  20 #, Q235, 16 mn, ASTM A105, ASTM A350 LF1, LF2 CL1 / CL2, LF3 CL1 / CL2, ASTM A694 F42, F46, F48, F50, F52, F56, the F60, F65, F70;  

The above introduction of the application and production technology of carbon steel elbow and material, the following brief introduction of the carbon steel elbow is mainly used in pipeline system, the elbow is to change the direction of the line pipe, according to the Angle can be divided into: 45 degrees, 90 degrees, 180 degrees of three kinds of common point of view, in addition the company also can produce according to the demand of customers manufacture carbon steel elbow 60 degrees as well as a variety of angles.