Grinding skills of stainless steel elbow pipe fitt

Grinding skills of stainless steel elbow pipe fittings  

Stainless steel elbow in the production processing after forming the first is to stainless steel elbow pipe grinding treatment, grinding can be the surface of the stainless steel elbow pipe more bright, but also can remove some forged corners.  The grinding wheel is mainly used for grinding stainless steel elbow pipe fittings. The black one is easier to use, and the general apprentice uses the red one. It should be slow and cannot be pressed hard.  

After all the grinding has been done, the grinding wheel of 325 shutter should be changed for a new grinding. The grinding wheel of 320 mesh should be polished very carefully, otherwise there will be scratches left on the grinding wheel of 80 mesh.  After grinding the 20-mesh shutter grinding wheel, wax the elbow, more on the new hand is better.  Then use kenaf wheel to continue grinding, then press hard grinding, the harder the better.  Remember to wipe the wax clean after grinding, it is easier to rub with some dust.  

According to the above introduction of stainless steel elbow pipe grinding in the process of operation do not worry.  Stainless steel elbow fittings for long term storage.  Regular inspection should be made, and the exposed processing surface should be kept clean. When stored, it should be placed indoors in a ventilated and dry place, and pile or open storage is strictly prohibited.  Always keep the stainless steel elbow dry and ventilated, keep the retainer clean and tidy, according to the accurate storage method.