What are the material types of elbow

What are the material types of elbow  

Elbow is used in the mass production of seamless elbow forming technology, in the common specifications of elbow production has been replaced by hot push method or other forming technology, but in some specifications of elbow due to the production of less, too thick or too thin wall thickness.  Alloy stamping elbow is divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, etc.  Elbow can be divided into pushing, pressing, forging, casting and so on.  

Elbow material can be generally divided into carbon steel, stainless steel, alloy steel.  Carbon steel 20#, Q235, 16Mn, stainless steel 304, 316L, 304L, 2205, 2507, etc.  

Elbow is a common connection pipe fittings in plumbing installation. It is used to connect the pipe at the corner and change the direction of the pipe.  

Other names: 90° elbow, right Angle elbow, love elbow, stamping elbow, pressing elbow, mechanical elbow, welding elbow, etc  

The use of elbow: to connect two pipes with the same or different nominal diameter, so that the pipeline can turn 90°, 45°, 180° and various degrees.  

Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and greater than 1.5 times of pipe diameter belongs to elbow  

Elbow packaging requirements for small pipe fittings, such as export, you need to do wooden cases, about 1 cubic meter, the number of elbows in this box can not exceed about a ton, the standard allows sets, that is, large sets of small, but the total weight generally can not exceed 1 ton.  For large pieces, you need to pack them individually, like 24 ".  Another is the packaging mark, the mark is to indicate the size, steel number, batch number, manufacturer, etc