Application of stainless steel elbow pipe fittings

Application of stainless steel elbow pipe fittings  

Stainless steel elbow pipe manufacturers mainly produce a variety of different types and wall thickness of stainless steel elbow pipe, stainless steel elbow pipe material is mainly made of materials required by customers.  The company has advanced equipment to make customers satisfied with the stainless steel elbow pipe fittings, perfect after-sales service welcome to inquire and order, our company to provide customers with low prices and good quality products.  

Stainless steel elbow pipe fittings should be applied;  It is mainly a common component in pipeline construction. There are some similarities between elbow pipe fittings and elbow in use. There are some differences according to different use situations.  Stainless steel elbow fittings need to be saved in use. In order to avoid corrosion of the elbow, elbow fittings need to be detected, cleaned and decontaminated. When storing the elbow, avoid outdoor storage, ensure that the environment is dry and ventilated, so as to ensure that the elbow is not corroded.  

When using elbows, stainless steel elbows can be installed directly on the pipe according to the way they are connected. Components can be executed according to the position in which they are used. In general, equipment can be placed anywhere in the pipe, but it must be easy to operate and inspect.  Please note that the medium flow to cut off the stainless steel elbow flows under the longitudinal valve. The stainless steel elbow has horizontal equipment. The stainless steel elbow should be sealed in the equipment to avoid a large number of leaks, so as not to affect the normal operation of the pipeline.  

Stainless steel elbow valve cover gasket bolts should be evenly on tight, should not be in bending state, in use, stainless steel elbow must always be kept clean, drive screw should be carried out smoothly as planned, so as to avoid contact with the valve stem, the movement of the valve stem, cause leakage, once found fault, stop immediately, to determine the cause of the problem.  

Stainless steel elbow construction should pay attention to the comprehensive factors of soil and geology, pay attention to the bearing temperature of equipment or parts when painting, the temperature of each equipment unit is different.  Please pay attention to the instruction manual of equipment unit during construction, so as not to damage the equipment, according to the wear medium and cleaning speed.  The structural thickness of wind road, elbow and cyclone separator is generally 20mm. For parts with serious local wear, such as dust collector cone and cleaning tank, the building thickness is increased to 30mm or 40mm.  

First of all, the body is installed on refractory castable, it depends on the thickness of the main materials used in and allowed to heat, and then in the refractory castable surface welding layer of steel net, the implementation of wear resistant ceramic coating, using the directional fiber to improve the wear resistant ceramic coating toughness and resistance to deformation, therefore, need to set up at the scene of equipment on the construction or construction in the factory after the suspension,  It has no effect on the strength and life of stainless steel elbow.  

• 上一篇：Carbon steel elbow features and production standar

• 下一篇：Theoretical weight of carbon steel elbow