Which elbow manufacturers need to pay attention to

Which elbow manufacturers need to pay attention to when producing

Our company in the production and processing of elbow pipe fitting products, the first thing we need to pay attention to is the material and wall thickness ordered by customers and the processing technology. The processing technology used in the commonly used elbow specifications and models is the pushing molding process. In some specifications and models, the elbow should be produced in less quantity, the wall thickness is too thin or too thick, and the production process is different.

Elbow manufacturers produced by the main processing technology push, stamping production process, in the forming process of stamping elbow, need to produce good elbow product diameter is the same, the use of pressure in the mold directly pressing forming.

Stamping elbow is divided into cold stamping and hot stamping of two different material production technology of the stamping elbow, stamping elbow manufacture process than elbow push system, quality assurance, appearance beautiful, stamping elbow outer arc in the tensile state during forming, no other parts redundant metal to compensate, so the outer arc not thick about thinned by about 10%. Use this bend the quality of the products of the production process to ensure the advantages of low cost, so the stamping elbow applicable to small batch production process the customer order, but our company is customer's small batch and mass order elbow products, our company will be made according to the requirements of processing and forming, adopting the advanced technology and equipment for processing.

Elbow products use the main elbow pushing machine, put the tube blank into the mold, after the upper and lower die closing, under the push rod, the tube blank along the inner die and the outer die of the reserved gap movement and complete the forming process, the internal and external die extrusion forming process, so that the elbow product appearance is beautiful, uniform wall thickness, small size deviation, Therefore, the cold extrusion production process is used in the production and processing of stainless steel elbow with thin wall thickness. The precision of the internal and external die used in this process is high, and the wall thickness deviation of the tube blank is also harsh. The above are two kinds of elbow different process of production processing forming, if you do not understand our company welcome your consultation!