The use of stainless steel elbow details

The use of stainless steel elbow details

There are many problems to be noted in the use and maintenance of stainless steel elbows, which require users to use in accordance with certain methods, and use and maintenance in an accurate and fair way. Consider the following:

1. Long-term storage of stainless steel elbows should be checked in time, often keep the exposed surface clean, remove dirt, neatly stored in a breathable and dry place indoors, strictly prohibited stacking or open storage. Stainless steel elbows are always kept dry and breathable, cages clean and tidy, and stored according to accurate storage methods.

2. During installation, the stainless steel elbow can be directly installed on the pipe according to the connection method, and the stainless steel elbow can be installed according to the position used. In general, it can be installed anywhere in the pipe, but an easy to operate inspection is required, noting that the flow of the stainless steel elbow medium should flow under the longitudinal disc, stainless steel elbow should only be installed horizontally. Stainless steel elbow installation should pay attention to seal, prevent leakage, affect the normal operation of the pipeline.

3. When using stainless steel elbow ball valve, globe valve and gate valve, can only open or close, do not adjust the flow, so as to avoid the sealing surface wear, gate valve and upper thread globe valve with inverted sealing device, handwheel fastened to the top, prevent media from leaking out from the filling point.

4. Use hand wheel to make stainless steel elbows. Do not use levers or other tools to avoid damaging valve parts. The hand wheel turns clockwise to close and vice versa. When using, we should be fair and ensure the right use methods and means.

5. The bolts of the packing cover of the stainless steel elbow valve should be tightened evenly and should not be pressed into a bent state, so as not to interfere with the movement of the valve stem or cause leakage.

6 stainless steel elbow in the process of use should be kept clean, transmission thread must be timely lubrication, once found fault, should immediately stop use, find out the cause of the fault.

• 上一篇：How much do you know about elbow products?

• 下一篇：Stamping elbow and straight seam elbow characteris