The connection of elbow fittings in pipes is gener

The connection of elbow fittings in pipes is generally operated

The company mainly provides a variety of elbow pipe products of different angles, which can make the pipe turn at different angles, suitable for different installation space. The commonly used Angle of elbow pipe fittings is divided into 45 degrees, 180 degrees, 90 degrees, 60 degrees and so on. The following is a brief introduction to the use and installation of elbow pipe fitting; It is often necessary to use the connection 180 degree elbow to change the direction of the pipeline. The existing connection 180 degree elbow is fixed after the two ends are connected to the pipeline. When the installation position needs to be changed, the connection 180 degree elbow can only be cut off by means of destruction, and then installed again.

The 180 degree elbow we produce includes the connection and installation in the process of pipeline use. First, the installation part is provided with a sealing groove outside, the sealing groove is provided with a sealing ring, and the external set of screw tube is installed. The screw sleeve and the screw tube are connected by threads. This installation mode greatly reduces the maintenance workload, saves the maintenance cost, the operation is very convenient; By setting the sealing groove and sealing ring, ensure that the installation part and the screw connection is tighter, avoid leakage; By setting the card, the screw sleeve operation is installed and positioned, which simplifies the operation and improves the operation efficiency.

In a piping system, a bend is a pipe fitting that changes the direction of the line. According to the Angle, there are 45° and 90°180° three commonly used, in addition, according to the needs of the project also includes 60° and other abnormal Angle elbow. Elbow materials are cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics. The connection modes with the pipe are: direct welding (commonly used) flange connection, hot melt connection, electric melt connection, thread connection and socket connection, etc. According to the production process can be divided into: welding elbow, stamping elbow, push elbow, casting elbow and so on. Other names :90 degree bend, right Angle bend, love bend, etc.