Advantages of using carbon steel elbows

Advantages of using carbon steel elbows

Carbon steel elbow is made of the same material as the pipe plate by stamping die stamping into a half ring elbow, and then the two half ring elbow group welding forming, carbon steel elbow welding needs to be produced and processed in accordance with a certain process. Generally, the higher the carbon content of carbon steel elbow, the greater the hardness, the higher the strength, but the lower the plasticity. Mainly refers to the mechanical properties depend on the carbon content of steel, and generally do not add a lot of alloying elements of steel, sometimes also known as general carbon steel or carbon steel. Carbon steel, also known as carbon steel, refers to iron carbon alloy with carbon content of less than 2% WC. According to the long-term production of carbon steel elbow, summed up in many failures, more reasonable and scientific new experience, adding a certain amount of rare earth elements to improve the alloy quality of steel. Also plays the role of refining grain; Forming a protective film on the surface, adding a certain amount of boron carbide, the hardness can be controlled within the range of HRC45~65, at the same time to solve the conflict between the hardness and weldability of wear-resistant elbow, with higher wear resistance, in practical application of other wear-resistant materials can not compare with it.

Carbon steel elbow use advantages:

Light weight: the density of stamping elbow is 0.89-0.91g/cm, one tenth of the steel pipe. Because of the light weight, can greatly reduce the industrial transportation costs and installation of the construction intensity.

Good heat resistance: when the working water