Carbon steel elbow models provided by customers

Carbon steel elbow is a common pipe connector, often used for Angle changes or steering in pipe systems. It is made of carbon steel material and has high strength and corrosion resistance. There are many types of carbon steel elbow, and below I will give you a detailed introduction to some common carbon steel elbow models.

1. 45 degree carbon steel elbow: This elbow has a bending Angle of 45 degrees and is widely used in pipeline systems where medium Angle changes are required. It enables the pipeline to maintain the smooth flow of fluid when turning, and is suitable for the transportation of different media such as liquid, gas and steam.

2. 90 degree carbon steel elbow: 90 degree carbon steel elbow is a common type of elbow, its bending Angle is 90 degrees. It is usually used in piping systems where a significant change of direction or turn is required, such as at pipe connection points, pipe corners, etc. 90-degree carbon steel elbow is widely used in the industrial field, with better pressure bearing capacity and fluid transfer performance.

3. 180 degree carbon steel elbow: 180 degree carbon steel elbow is a semicircular elbow with a bending Angle of 180 degrees. It is mainly used in situations where the direction of the pipeline is completely opposite, at the end of the pipeline, the reverse flow system, the closed loop, etc. The 180-degree carbon steel elbow can effectively change the fluid and keep the fluid flowing smoothly.

• 上一篇：Carbon steel elbow physical manufacturers

• 下一篇：Large diameter carbon steel elbow manufacturers