Straight seam pipe bend

Straight seam pipe bend

Ao Guang Pipe Fitting Co., Ltd. is a manufacturer of straight seam elbow.Above are pictures of straight seam elbows for new and old customers.Straight seam elbow is divided into long half straight seam elbow and short half straight seam elbow.The short radius elbow is often used in the bending part of the pipeline to change the direction of the pipeline. The commonly used short semi-straight joint elbow has the Angle of 45° and 90° straight joint elbow.The bending radius of the straight seam elbow is about 1.0 times the outer diameter of the pipe to become the short semi straight seam elbow, and about 1.5 times the outer diameter of the pipe to become the long semi straight seam elbow.The above brief introduction of long half straight elbow and short half straight elbow respectively.

Straight seam elbows are metal fittings used to change the direction of carbon steel pipes.Straight seam elbows are connected by welding.Straight seam elbow Angle points 45°, 90° 190° three commonly used, in addition, according to the needs of the project can also have other angles of straight seam elbow.Elbow materials are carbon steel, stainless steel, alloy steel and other non-ferrous metals and plastics.Straight seam elbow and pipe connection is simple direct welding.The above straight seam elbow sales to all places, welcome new and old customers to consult.

Classification of butt welding elbow: butt welding elbow according to its radius of curvature, can be divided into long radius butt welding elbow and multi-radius butt welding elbow.

Butt-welding elbows are mainly used to connect two sections of pipes with different end-face radii, or for pipe resizing.This type of elbow generally needs to be produced according to specific engineering requirements or drawings. In addition to meeting the requirements of pipe diameter, it must also consider the specific situation of the pipe, such as pipe conveying pressure, fluid viscosity, temperature, wear resistance, fluid conveying temperature and other factors.Usually the butt welding elbow is welded at the pipeline construction site, which is due to the different welding standards of all kinds of pipelines, and it needs to be welded on site according to the weld level of the pipeline.

The pipe standard of butt welding elbow is the same, and there are many types, among which STD or XS are commonly used. According to the Angle of the elbow, there are 45 degrees butt welding elbow, 90 degrees butt welding elbow, or 180 degrees butt welding elbow.Butt-welding elbows are made of carbon steel, alloy