Stamping elbow

Stamping elbow 
Stamping elbow is a kind of connecting pipe fitting commonly used in pipeline installation. It connects two pipes with the same nominal diameter to make the pipes turn at a certain Angle.

Stamping elbow introduction: Stamping elbow processing production efficiency is high, easy to operate, easy to realize mechanization and automation, this is because the stamping is to rely on punching die and stamping equipment to complete the processing.

Stamping elbow in the manufacturing process can reach dozens of times, high-speed pressure can reach hundreds or even thousands of times per minute or more, and each stamping stroke may get a stamping elbow.

Stamping elbow generally has no chip and scrap generation, less material consumption, and does not need other heating equipment, so that a material saving, energy saving processing method, the cost of stamping parts is lower.

Stamping elbow can be processed out of a larger size range, the shape of the more complex parts, such as small to the clock stopwatch, large to the car rail, covering parts, etc., plus the edge hardening effect of the stamping material, the strength and stiffness of the stamping elbow is higher.Stamping elbow because the mold to ensure the size and shape accuracy of stamping parts, and generally do not destroy the surface quality of stamping, and the life of the mold is generally longer, so the quality of stamping is stable, good interchangeability, with the same characteristics.

The forming process of stamping elbow is complex. It needs to be welded according to different materials and uses and gradually formed under certain pressure.Stamping elbow forming needs to be carried out in accordance with a certain process, strictly abide by the corresponding process, otherwise the production of stamping elbow will have quality problems, according to the need, a circular ring shell can cut four 90 degree elbow or six 60 degree elbow or different specifications of elbow.This process is suitable for making large push elbow of any specification with the ratio of middle diameter to inner diameter of elbow greater than 1.5D, and is an ideal method for making large push elbow.

This process forming method is used in the production of different elbow, and shows good value in different fields, so that the process has good value in the production of different elbow.

Stamping elbow forming process of the advantages of the main variable now the following several aspects: stamping elbow pipe raw material, do not need to save energy pipe equipment and mould cost, and can get any diameter and wall thickness is relatively thin elbow push system, this kind of stamping elbow of raw material is more special, don't need to join pipe material, easy to control during machining.

The blank of stamping elbow is flat or developed surface, so the blanking is simple, the accuracy is easy to ensure, the assembly and welding are convenient, the raw materials are easy to control during the processing, the operation is simple, there is no complex process, and the welding and human assembly are more convenient.

Because of the above simple reasons, can shorten the manufacturing cycle, the production cost is greatly reduced, because do not need any equipment, especially suitable for on-site processing production and manufacturing of