Elbow manufacturer briefly introduces the type and

Elbow manufacturer briefly introduces the type and specification of elbow

Bends are mainly used to connect two or two pipes. Direction can be changed. We can provide short and long radius elbows.Usually the elbow is made of carbon steel, alloy steel, stainless steel and other materials.

Elbow is divided into seamless elbow: 1/2 DN15DN600 "24".Welding elbow: 4"72" DN150DN1800.Elbow material model: SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, STD, SCH5S, SCH20s, SCH40s, SCH80s.Thickness of elbow: Thickness: 120mm.Material of elbow: Carbon steel :ASTM/ASME A234 WPBWPC Alloy steel :ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911

ASTM/ASME A403 WP 304-304L-304H-304MN-304N, ASTM/ASME A403 WP 316-316L-316H-316MN-316N-316Ti,ASTM/ASME A403 WP 347-347H Low Temperature Steel :ASTM/ASME A402 WPL 3-WPL 6 High Performance :ASTM/ASME A860 WPHY 42-46-52-60-65-70The above is the introduction of the specifications, models and materials made by the elbow manufacturers.Welcome new and old users to order.

Elbows are divided into two types in pipe use to determine the distance the pipe changes direction from one end to the center line of the other end.This is called the distance from the center to the face is equal to the radius of the bend at the elbow.-LR: = 1×2(NPS)× 25.4A = 76.2mm

180 ° -LR: = 2 times 90 ° LR elbow A= 152.4mm

SR: = 2(NPS) x 25.4a = 50.8mm

• 上一篇：Elbow manufacturer's description of the produ

• 下一篇：The alloy elbow has good corrosion resistance effi