The production and packaging of carbon steel elbow

The production and packaging of carbon steel elbow are introduced

The basic process of carbon steel welding elbow is: first welding a polygonal ring shell or polygonal fan shell closed at both ends, the internal full of pressure media, with internal pressure, the cross-section of the polygon gradually into a circle under the action of internal pressure, and eventually become a circular shell.According to the need, a circular ring shell can be cut into 4 90 degree elbow or 6 60 degree elbow or other specifications, this process is suitable for making the middle diameter of the elbow and the inner diameter of the elbow ratio is greater than 1.5 in any specifications of large elbow, is currently an ideal way to manufacture large carbon steel elbow.

The production of carbon steel elbow is mainly divided into: push, pressing, forging, casting, etc.

Carbon steel elbow in the use of the process is mainly welding and flange connection.

The company mainly produces carbon steel elbow, straight seam elbow, seamless elbow, stamping elbow and so on.

The elbow will be inspected and visited by quality inspection personnel in our company before it leaves the factory.The company produces elbow, tee, size head, cap and other products.Put the quality of each customer's products first.In order to improve the quality of customers in the process of use, our company will groove each product, retain a certain Angle, with a certain edge.Edge thickness groove Angle must be carried out in the range specified by the customer, as well as the product standard, standard number, etc.The location of the product logo is approved by the customer.Generally near the center line of the side of the product and the mouth of the product.Then the surface of the product according to customer requirements to paint and packaging.All the procedures are based on the needs of the customer as the standard.

• 上一篇：Introduction of small caliber elbow

• 下一篇：How to test the quality of elbow