The wear resistance of carbon steel elbow is good

The wear resistance of carbon steel elbow is good

Carbon steel elbows connect two pipes of the same nominal size to make a 90 degree turn.The GB elbow is a pipe fitting to change the direction of the pipeline. We have seen the push machine. It is actually very simple.Straight seam elbow with exquisite appearance and accurate size is widely used in oil, natural gas, edible oil, water treatment and other large pipe.Straight - seam elbow is an elbow made of straight - seam pipe.The straight seam is formed by the load shear welding of the plate, and there is a weld in the middle. The pressure resistance is not as good as the seamless one.The Angle of the straight seam elbow is 45 degrees, 60 degrees, 90 degrees, 180 degrees.Pipe to pipe interconnection parts.

Long service life, the service life of the pipe can reach more than 50 years under the rated service temperature and pressure, with UV protection, so that the product will not fade.According to the need, a circular ring shell can be cut into 4 90 degree elbow or 6-60 degree elbow or other specifications, this process is used to manufacture any specifications of large elbow with the ratio of the middle diameter of the elbow to the inner diameter of the elbow greater than 1.5 times, is currently an ideal method to manufacture large carbon steel elbow.

The introduction and use of elbow pipe fittings

The company produces all kinds of material elbow pipe fittings pipe joints, the company produced by the elbow pipe through the certification of various departments.Our company takes advanced technology as the guarantee, the length of the elbow pipe fitting is just equal to the bending radius of the elbow, so many people mistakenly think that the bending radius of the elbow pipe fitting is the length of the elbow.The space Angle between the two ports of an elbow is the degree of the elbow, so the two ports of a 90° elbow are theoretically perpendicular to each other.The end of the elbow is a plane and the plane is perpendicular to the path of the elbow.The bending radius is the distance from the center of the circle to the central arc.

Specification of elbow fittings: the parameter information of elbow fittings mainly includes material, diameter, degree, bending radius and wall thickness.Elbow fittings mainly need diameter, degree, bending radius, wall thickness these are the key points.An elbow is a pipe fitting used to change the direction of a line.The Angle of elbow pipe fittings is divided into 45°, 90°180° three kinds of commonly used, can be customized according to customer needs of various types of elbow.